Skip to product information
1 of 4

Speedometer sticker for Harley-Davidson Touring, 2000 - 2003

Speedometer sticker for Harley-Davidson Touring, 2000 - 2003


Regular price €8,99 EUR
Regular price Sale price €8,99 EUR
Sale Sold out
Tax included. Shipping calculated at checkout.

25 in stock


Speedometer sticker for Harley-Davidson Touring models with the front fairing: Road Glide FLTR, Electra Glide FLHT, FLHTC models.
Model year: 2000 - 2003

Exceptions: Road King, FLHR, FLHRC

The outside diameter of the sticker is 80 mm (3 1/8 inch).

Suitable for these models: 2000-2003 FLHT, 2000-2003 FLHTC, 2000-2003 FLHTP, 2000-2003 FLTR, 2000-2003 all Electra Glide models, and 2000-2003 all Road Glide models

Additional Information

Speedometer stickers are designed and manufactured to convert the MPH speedometer to KM/H. Each sticker works with a particular Harley-Davidson USA motorcycle speedometer. Easy application, no need for special tools.

Three different background colours are available: black (non-transparent), grey (non-transparent) and clear (semi-transparent) stickers with black lettering.

The price is for one sticker.

Speedometer Stickers Application Instructions

The following are general instructions for applying STICKERHAUZ Speedometer Conversion stickers.

Stickers must be applied in dust, wind and no direct sun-controlled area or room, with environment temperature +18°C (65°F) or above. Thoroughly clean the glass of the speedometer with conventional cleaning agents before the application procedure. Do not disassemble the speedometer – apply the sticker on top of the speedometer glass.

Sticker application procedure:

  • Prepare a spray bottle of low surface-tension water mixture (to ½ l water, add a few drops of dishwashing detergent);
  • Spray the speedometer glass surface with the mixture. Ensure there is no lint and dust left on the surface;
  • Spray fingertips and the edge of the sticker you are pulling up. Do not touch the dry, sticky surface of the sticker with dry fingers;
  • Place the sticker on the already wet surface to be bonded;
  • Position and align sticker with speedometer face;
  • Press down the sticker with overlapping wiping movements with the squeegee, credit card, or your finger. Make sure that water trapped between the base and the adhesive is completely pressed out;
  • Clean and dry with a piece of cloth;
  • Allow to fully dry and reach full bond strength during the next 12 hours.
Shipping Information View full details

Customer Reviews

Based on 2 reviews
Thomas Holum

Fast shipping and good quality.

Istvan Zold
Just the right thing you need...

Great product, using them for years now on all my US import Harleys. Can’t recommend it enough. Thanks guys.